{"id":616,"date":"2017-06-26T16:03:47","date_gmt":"2017-06-26T13:03:47","guid":{"rendered":"http:\/\/cstel.ua\/?page_id=616"},"modified":"2017-12-15T18:00:22","modified_gmt":"2017-12-15T15:00:22","slug":"english-transmitter-combiners","status":"publish","type":"page","link":"https:\/\/cstel.ua\/en\/satalog-en\/english-transmitter-combiners\/","title":{"rendered":"Transmitter Combiners"},"content":{"rendered":"

Hybrid Transmitter Combiners<\/strong><\/h2>\n

Horwin CH-V\/Ux-x series is a hybrid combiners with ferrite isolators used for combining several VHF\/UHF transmitters into one antenna with close frequency spacing. Combiners are configured in sets of 2 or 4 channels.<\/p>\n

There are two model versions \u2013 single or dual ferrite isolators depending on the required Tx \u2013 Tx isolation and (or): low power\u2013 up to 50 watts and high \u2013 up to 100.Nominal impedance is 50 Ohms. N-type \u201cfemale\u201d connectors are used for input\/output connections. Combiners are mounted on standard EIA 19\u201d panel 3 U high and 355 mm depth.<\/p>\n

Combiners are tuned at customer specified frequencies, so transmit frequencies should be specified when ordering.<\/p>\n

CH combiner (hybrid)
\nx frequency range (V=VHF, U=UHF)
\nx number of Tx channels
\nx isolator type (1=single, 2=dual)
\nx input power (L=50W, H=100W)<\/p>\n\n\n\n
\"\"<\/a><\/td>\n\"\"<\/strong><\/a><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n\n\n\n\n\n\n\n\n\n\n\n
\n

Model<\/p>\n<\/td>\n

\n

Frequency range, MHz<\/p>\n<\/td>\n

\n

Type<\/p>\n<\/td>\n

\n

Tx Chanels<\/p>\n<\/td>\n

\n

Insertion losses
\nTx \u2013Ant, dB<\/p>\n<\/td>\n

\n

Isolation
\nTx \u2013 Tx, dB<\/p>\n<\/td>\n<\/tr>\n

\n

CH-V2-1L(H)<\/p>\n<\/td>\n

\n

144 \u2013 174<\/p>\n<\/td>\n

\n

single isolator<\/p>\n<\/td>\n

2<\/td>\n< 4<\/td>\n\n

> 60<\/p>\n<\/td>\n<\/tr>\n

\n

CH-V2-2L(H)<\/p>\n<\/td>\n

\n

144 \u2013 174<\/p>\n<\/td>\n

\n

dual isolator<\/p>\n<\/td>\n

2<\/td>\n< 4,5<\/td>\n\n

> 80<\/p>\n<\/td>\n<\/tr>\n

\n

CH-V4-1L(H)<\/p>\n<\/td>\n

\n

144 \u2013 174<\/p>\n<\/td>\n

\n

single isolator<\/p>\n<\/td>\n

\n

4<\/p>\n<\/td>\n

\n

< 7,5<\/p>\n<\/td>\n

\n

> 60<\/p>\n<\/td>\n<\/tr>\n

\n

CH-V4-2L(H)<\/p>\n<\/td>\n

\n

144 \u2013 174<\/p>\n<\/td>\n

\n

dual isolator<\/p>\n<\/td>\n

\n

4<\/p>\n<\/td>\n

\n

< 8<\/p>\n<\/td>\n

\n

> 80<\/p>\n<\/td>\n<\/tr>\n

\n

CH-U2-1L(H)<\/p>\n<\/td>\n

\n

400 \u2013 470<\/p>\n<\/td>\n

\n

single isolator<\/p>\n<\/td>\n

\n

2<\/p>\n<\/td>\n

< 4<\/td>\n\n

> 60<\/p>\n<\/td>\n<\/tr>\n

\n

CH-U2-2L(H)<\/p>\n<\/td>\n

\n

400 \u2013 470<\/p>\n<\/td>\n

\n

dual isolator<\/p>\n<\/td>\n

\n

2<\/p>\n<\/td>\n

\n

< 4,5<\/p>\n<\/td>\n

\n

> 80<\/p>\n<\/td>\n<\/tr>\n

\n

CH-U4-1L(H)<\/p>\n<\/td>\n

\n

400 \u2013 470<\/p>\n<\/td>\n

\n

single isolator<\/p>\n<\/td>\n

\n

4<\/p>\n<\/td>\n

\n

< 7,5<\/p>\n<\/td>\n

\n

> 60<\/p>\n<\/td>\n<\/tr>\n

\n

CH-U4-2L(H)<\/p>\n<\/td>\n

\n

400 \u2013 470<\/p>\n<\/td>\n

\n

dual isolator<\/p>\n<\/td>\n

\n

4<\/p>\n<\/td>\n

< 8<\/td>\n\n

> 80<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

8\u201c Cavity Transmitter Combiners<\/strong><\/h1>\n

Horwin CB8-V\/Ux-x series is low insertion loss combiners with ferrite isolators used for combining several transmitters into one antenna with up to 125 kHz (VHF) and 250 kHz (UHF) frequency spacing. Combiners are configured in sets of 2, 3 or 4 channels.<\/p>\n

There are two model versions \u2013 single or dual ferrite isolators depending on the required Tx \u2013 Tx isolation. Nominal impedance is 50 Ohms with typical input SWR <1.5. Filters allow to handle up to 50 watts power.<\/p>\n

Mounting option is specified by customer (e.g. \u201cfree standing\u201d, vertically or horizontally into EIA 19\u201d etc). N-type \u201cfemale\u201d connectors are used for input\/output connections.<\/p>\n

Combiners are tuned at customer specified frequencies, so transmit frequencies should be specified when ordering.<\/p>\n

CB8 8\u201d cavity combiner
\nx frequency range (V=VHF, U=UHF)
\nx number of Tx channels
\nx isolator type (1=single, 2=dual)<\/p>\n\n\n\n
\"\"<\/a><\/td>\n\"\"<\/strong><\/a><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
\n

Model<\/p>\n<\/td>\n

\n

Frequency range, MHz<\/p>\n<\/td>\n

\n

Type<\/p>\n<\/td>\n

\n

Tx Chanels<\/p>\n<\/td>\n

Insertion losses,
\ndB@spacing kHz<\/td>\n		\n

Isolation
\nTx \u2013 Tx, dB<\/p>\n<\/td>\n<\/tr>\n

\n

CB8-V2-1<\/p>\n<\/td>\n

\n

144 \u2013 174<\/p>\n<\/td>\n

\n

single isolator<\/p>\n<\/td>\n

\n

2<\/p>\n<\/td>\n

\n

2,2@150<\/p>\n<\/td>\n

\n

>60<\/p>\n<\/td>\n<\/tr>\n

\n

CB8-V2-2<\/p>\n<\/td>\n

\n

144 \u2013 174<\/p>\n<\/td>\n

\n

dual isolator<\/p>\n<\/td>\n

\n

2<\/p>\n<\/td>\n

\n

2,7@150<\/p>\n<\/td>\n

\n

>80<\/p>\n<\/td>\n<\/tr>\n

\n

CB8-V3-1<\/p>\n<\/td>\n

\n

144 \u2013 174<\/p>\n<\/td>\n

\n

single isolator<\/p>\n<\/td>\n

\n

3<\/p>\n<\/td>\n

\n

2,7@150<\/p>\n<\/td>\n

\n

>60<\/p>\n<\/td>\n<\/tr>\n

\n

CB8-V3-2<\/p>\n<\/td>\n

\n

144 \u2013 174<\/p>\n<\/td>\n

\n

dual isolator<\/p>\n<\/td>\n

\n

3<\/p>\n<\/td>\n

\n

3,2@150<\/p>\n<\/td>\n

\n

>80<\/p>\n<\/td>\n<\/tr>\n

\n

CB8-V4-1<\/p>\n<\/td>\n

\n

144 \u2013 174<\/p>\n<\/td>\n

\n

single isolator<\/p>\n<\/td>\n

\n

4<\/p>\n<\/td>\n

\n

3,2@150<\/p>\n<\/td>\n

\n

>60<\/p>\n<\/td>\n<\/tr>\n

\n

CB8-V4-2<\/p>\n<\/td>\n

\n

144 \u2013 174<\/p>\n<\/td>\n

\n

dual isolator<\/p>\n<\/td>\n

\n

4<\/p>\n<\/td>\n

\n

3,7@150<\/p>\n<\/td>\n

\n

>80<\/p>\n<\/td>\n<\/tr>\n

\n

CB8-U2-1<\/p>\n<\/td>\n

\n

400 \u2013 470<\/p>\n<\/td>\n

\n

single isolator<\/p>\n<\/td>\n

\n

2<\/p>\n<\/td>\n

\n

2,3@450<\/p>\n<\/td>\n

\n

>60<\/p>\n<\/td>\n<\/tr>\n

\n

CB8-U2-2<\/p>\n<\/td>\n

\n

400 \u2013 470<\/p>\n<\/td>\n

\n

dual isolator<\/p>\n<\/td>\n

\n

2<\/p>\n<\/td>\n

\n

2,8@450<\/p>\n<\/td>\n

\n

>80<\/p>\n<\/td>\n<\/tr>\n

\n

CB8-U3-1<\/p>\n<\/td>\n

\n

400 \u2013 470<\/p>\n<\/td>\n

\n

single isolator<\/p>\n<\/td>\n

\n

3<\/p>\n<\/td>\n

\n

2,8@450<\/p>\n<\/td>\n

\n

>60<\/p>\n<\/td>\n<\/tr>\n

\n

CB8-U3-2<\/p>\n<\/td>\n

\n

400 \u2013 470<\/p>\n<\/td>\n

\n

dual isolator<\/p>\n<\/td>\n

\n

3<\/p>\n<\/td>\n

\n

3,3@450<\/p>\n<\/td>\n

\n

>80<\/p>\n<\/td>\n<\/tr>\n

\n

CB8-U4-1<\/p>\n<\/td>\n

\n

400 \u2013 470<\/p>\n<\/td>\n

\n

single isolator<\/p>\n<\/td>\n

\n

4<\/p>\n<\/td>\n

\n

3,3@450<\/p>\n<\/td>\n

\n

>60<\/p>\n<\/td>\n<\/tr>\n

\n

CB8-U4-2<\/p>\n<\/td>\n

\n

400 \u2013 470<\/p>\n<\/td>\n

\n

dual isolator<\/p>\n<\/td>\n

\n

4<\/p>\n<\/td>\n

\n

3,8@450<\/p>\n<\/td>\n

\n

>80<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n","protected":false},"excerpt":{"rendered":"

Hybrid Transmitter Combiners Horwin CH-V\/Ux-x series is a hybrid combiners with ferrite isolators used for combining several VHF\/UHF transmitters into one antenna with close frequency spacing. Combiners are configured in sets of 2 or 4 channels. There are two model versions \u2013 single or dual ferrite isolators depending on the required Tx \u2013 Tx isolation  Read more<\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"parent":603,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":[],"aioseo_notices":[],"_links":{"self":[{"href":"https:\/\/cstel.ua\/en\/wp-json\/wp\/v2\/pages\/616"}],"collection":[{"href":"https:\/\/cstel.ua\/en\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/cstel.ua\/en\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/cstel.ua\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/cstel.ua\/en\/wp-json\/wp\/v2\/comments?post=616"}],"version-history":[{"count":7,"href":"https:\/\/cstel.ua\/en\/wp-json\/wp\/v2\/pages\/616\/revisions"}],"predecessor-version":[{"id":977,"href":"https:\/\/cstel.ua\/en\/wp-json\/wp\/v2\/pages\/616\/revisions\/977"}],"up":[{"embeddable":true,"href":"https:\/\/cstel.ua\/en\/wp-json\/wp\/v2\/pages\/603"}],"wp:attachment":[{"href":"https:\/\/cstel.ua\/en\/wp-json\/wp\/v2\/media?parent=616"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}