Duplexers

Compact Base Station Duplexers

Horwin DF-V/UM6-x series is compact 6 cavity base station duplex filters. “Band pass/reject” duplexer is ideal for repeaters, duplex base stations and other applications when combining of both receive and transmit frequencies into a single antenna is needed.

The high Q’s of the filter enable the duplexer to work with narrow duplex spacing and to keep low insertion losses. There are two model versions regarding power handling capability – low power up to 50 watts continuously and high – up to 150 watts.

The filter’s cavities are made of extruded aluminium. All coaxial cables used are semi-rigid silver plated. Cables and connectors are with PTFE insulation. Filters are covered with black polymer powdered coating.

Each filter is individually made and tuned, so receive and transmit frequencies should be specified when ordering.

DF duplex filter
x frequency range (V=VHF, U=UHF)
M6 “mobile” type, 6 cavities
S helically resonator
x input power (L=50W, H=150)

Model

Frequency range, MHz

Min. duplex frequency spacing, MHz

Tx noise suppression on Rx frequency, dB

Insertion loss, dB

DF-VM6-H

144 – 174

4 – 15

> 80

< 1.4

DF-VM6-SL

144 – 174

4 – 24

> 80

< 1.4

DF-UM6-H

400 – 470

4 – 15

> 85

< 1.4

DF-UM6-L

400 – 470

4 – 15

> 85

< 1.4

 

5” Cavity Base Station Duplexers

Horwin DF-V/U-x-5 series is a “Band pass/reject” type duplex filters based on quarter wave 5 inches width square cavities. Duplexer allows simultaneous operation of transmitter and receiver into a single antenna. Using large 5“ cavities means very high Q, resulting in very close frequency spacing and low insertion losses. Filters allow to handle up to 150 watts power.

Cavities are aluminium made with 5 mm thick top plate welded to the cavity body. Inner conductor and coupling loops are silver plated cooper made. Central tuning road is invar made. All this provides excellent frequency stability in temperature range from – 30 to + 60°C.

Each filter is individually made and tuned, so receive and transmit frequencies should be specified when ordering.

DF duplex filter
x frequency range (V=VHF, U=UHF)
x cavities numbers
x cavity width (inches)

Model

Cavities numbers

Frequency range, MHz

Min. duplex frequency spacing, kHz

Tx noise suppression on Rx frequency, dB

Insertion loss, dB

DF-V4-5

4

144 – 174

600

> 75

< 1.5

DF-V6-5

6

144 – 174

400

> 85

< 2

DF-U4-5

4

400 – 470

2000

> 75

< 1.5

DF-U6-5

6

400 – 470

1500

> 85

< 2